Brands

U-shaped rack panel with brush strip to pass through connectors and cables

Lockable 19" rackmounting drawer module Full extension ball race drawer slideDrawer on ball-bearing slide-in railIncl. Cylinder look and 2 keysfeatures a coupling on the drawer slide, allowing for removalWithout insert

Lockable 19" rackmounting drawer module Full extension ball race drawer slideDrawer on ball-bearing slide-in railIncl. Cylinder look and 2 keysfeatures a coupling on the drawer slide, allowing for removalWithout insert

Lockable 19" rackmounting drawer module Full extension ball race drawer slideDrawer on ball-bearing slide-in railIncl. Cylinder look and 2 keysfeatures a coupling on the drawer slide, allowing for removalWithout insert

Professional rack light with patented Smart Motion Sensor TechnologyStrip with 18 LEDsIndependent colour selection for active mode and sleep modeTimer control and adjustable sleep mode dimmerContinuous dimmingColour selectorIncluding power supply with strain relief

swivels flat against rack for transport or can be removed entirelyAlso useful for patch cords, etc.with soft PVC covering

19" rack cradle for "non-19" units Universal mounting hole pattern in the base, allows many units to be fittedInterior dimensions: 440 mm x 248 mm x 44.5 mm

19" Rackcradle extra deep for mounting non standard equipment with a depth of up to 375 mmRear edges is folded up 10 mm for extra stabilityVentilation slots in sides

19" Rack-Cradle extra deep for mounting non standard equipment with a depth of up to 375 mm Rear edge is folded up 10 mm for extra stabilityInternal width: 435mmVentilation slots in sides

19" Rack-Cradle extra deep for mounting non standard equipment with a depth of up to 375 mm Rear edge is folded up 10 mm for extra stabilityInternal width: 435mmVentilation slots in sides

This highly professional 2-way active system is designed for absolute, long-term reliability. With its rugged bass reflex housing and finely tuned, user-friendly presets, it is suitable for use as a full-range speaker, satellite or monitor. The Stinger� 28 A G3 is powered by a highly efficient Class-D amplifier with a powerful 500-watt continuous output. Its two specially developed 8" woofers and a BMS tweeter driver achieve a powerful bass response and fresh, natural trebles. The wave guide...

Engineered for rock-solid reliability day in, day out this active subwoofer is a truly professional performer. With built-in presets for quick system integration and a variety of cardioid array configurations it is completely user-friendly. The Stinger� SUB 18 A G3 is powered by high efficiency Class D amplification with a giant 800 watts RMS output. It drives a custom designed 18� woofer delivering a huge bottom end with terrific punch and excellent definition.The Stinger� SUB 18 A G3...

Adam Hall Multicore with Stage Box 12Ch. / 33 feet

Adam Hall Multicore with Stage Box 16 Ch. 4 Returns / 100 feet

Adam Hall Multicore with Stage Box 16 Ch. 4 Returns / 50 feet

U-Shaped Rack Panel

U-shaped vent with round holes Ventilation area 88 cm²

Lockable 19" rackmounting drawer module Full extension ball race drawer slideDrawer on ball-bearing slide-in railIncl. Cylinder look and 2 keysfeatures a coupling on the drawer slide, allowing for removalWithout insert

Sprung handle with black rubber grip

Gaffer adhesive tape Very high adhesion Easy unwind and easy tear

Gaffer adhesive tape Very high adhesion Easy unwind and easy tear

Safety rope with built-in fall brake The fall brake greatly reduces the momentum that occurs when the rope is jerked. This jerky load always occurs when the primary fuse fails, and the secondary fuse is loaded. The red color marking serves as an indicator for the condition of the savekings safety rope: in the case of a large jerky load, the loop contracts and the color marking is shifted.

Safety rope with built-in fall brake The fall brake greatly reduces the momentum that occurs when the rope is jerked. This jerky load always occurs when the primary fuse fails, and the secondary fuse is loaded. The red color marking serves as an indicator for the condition of the savekings safety rope: in the case of a large jerky load, the loop contracts and the color marking is shifted.

Adam Hall safety ropes - clearly oriented to the legislature 6 x 19 + FETwo-sided throatsOne-sided with captive carabiner (90 x 9, with screw protection)Stamping: WLL 250 kg W / KUp to 20 kg device weight with two-strand safety method1 m

Wire rope holder black galvanized, with locking nut and six-ball mechanism. BG and TÜV tested

Safety rope with built-in fall brake The fall brake greatly reduces the momentum that occurs when the rope is jerked. This jerky load always occurs when the primary fuse fails, and the secondary fuse is loaded. The red color marking serves as an indicator for the condition of the savekings safety rope: in the case of a large jerky load, the loop contracts and the color marking is shifted. By using Saveking's safety ropes, thinner ropes can be used: Savekings 3 mm (20 kg) »Safety rope 5-6...

16 mm bolt M10 for SCP710B

Perfect for lighting and multi-media applicationsAdjustable clamping lever - can be operated in any positionFull metal version (stainless steel and die-cast aluminum alloy)For mounting on round and square pipes as well as on flat objectsClamping range: 13 - 55 mm5/8 "(16 mm) hexagonal or round pin socket1 x M6 thread and 2 x M5 threadsTÜV testedLoad capacity: 20 kgnot rustyVarious fastening bolts optionally available ...

Adam Hall cable drum system made of special plastic with maintenance-free axle bearing. Changeable side cover plate with auxiliary winding Also suitable for installation of an XLR socket connector. Capacity depends on cable diameter: ø 6.5 mm = 100m ø 8 mm = 80m ø 10 mm = 60m ø 12 mm = 40m ø 14 mm = 30m

Rugged cable drum made of special shatter-proof plasticErgonomically milled handleParking brakeRemovable cable guideWeight only 1.8 kg

Power Link with Rubber cable H07RN-FEquipped with Neutrik True1 Series IP65 connectors

28-channel multicore with permanently attached 30-metre cable terminating in Adam Hall XLR plugs. The all-metal stage box has a solid strain relief in the transitional area between box and cable. The protruding sides optimally protect the sockets on the stage box against damage. With a built-in handle for ease of handling and prepared mounting possibilities for permanent installation. The additionally reinforced transition to the terminations prevents fatigue and cable breakage. For 24 send...

Cable drum with High-flexibility LSZH CAT5e cableProfessional RJ 45 cable AH connector (D-Type)Removable connector shell enables plugging into standard RJ45 socketCable length 30m

32-channel multicore with permanently attached 30-metre cable terminating in Adam Hall XLR plugs. The all-metal stage box has a solid strain relief in the transitional area between box and cable. The protruding sides optimally protect the sockets on the stage box against damage. With a built-in handle for ease of handling and prepared mounting possibilities for permanent installation. The additionally reinforced transition to the terminations prevents fatigue and cable breakage. For 24 send...

In 9 mm deep dish with rivet protectionZinc plated steel, 5.1 mm mounting holes

In 9 mm deep dish with rivet protectionZinc plated steel, 5.1 mm mounting holes

In 9 mm deep dish with rivet protectionZinc plated steel, 5.1 mm mounting holes

In 9 mm deep dish with rivet protectionZinc plated steel, 5.1 mm mounting holes

Sprung handle for surface mounting with black PVC grip.

Rubber Foot

This latch closure has been specially developed for small flaps, doors or similar areas. We have paid much attention to the low height of the closure system to cover as many applications.

This latch closure has been specially developed for small flaps, doors or similar areas. We have paid much attention to the low height of the closure system to cover as many applications.

Sliding Latch System This latch closure has been specially developed for small flaps, doors or similar areas. We have paid much attention to the low height of the closure system to cover as many applications.

Bracket for the opposite side of the lid in a flat lid system

Butterfly clasp

The closing mechanism of the butterfly is equipped with a counter-pressure spring to be automatically led out in its opening position of about 30º. For additional needs, the locking hook can also continue to move to the outside.big suspension un cranked  14 mm deep ...

The closing mechanism of the butterfly is equipped with a counter-pressure spring to be automatically led out in its opening position of about 30º. For additional needs, the locking hook can also continue to move to the outside.